Getting the metal plate behind the steering wheel off your 2021 Silverado can be a challenging task, but it’s definitely doable with a few tools and some patience. Here’s how you can remove the plate without damaging the console or any other components:
(How To Get The Metal Plate Behind The Steering Wheel Off 01 Silverado)
Materials needed:
* A flathead screwdriver (optional)
* Tacker or hammer (optional)
Step 1: Disconnect the steering column
Before you start removing the plate, make sure to disconnect the steering column from the dashboard. You can usually do this by holding the column between two chairs and turning it counterclockwise until it clicks into place.
Step 2: Use a flathead screwdriver to unscrew the screws holding the plate in place
Once you’ve disconnected the steering column, use a flathead screwdriver to unscrew the screws that hold the metal plate in place. These screws are typically located on the side of the plate and will need to be removed using the flathead screwdriver.
Step 3: Remove the plate
Once you’ve unscrewed the screws holding the plate in place, carefully lift the plate away from the steering wheel. If you’re working alone, you may want to have someone help you with this step as lifting heavy objects can be dangerous.
Step 4: Clean up the area around the plate
After you’ve removed the plate, use a damp cloth to wipe away any dirt or debris that may have gotten stuck to it. You can also use a small amount of white vinegar mixed with water to help remove any residue.
Step 5: Reassemble the steering column
Once you’ve cleaned up the area around the plate and removed all of the screws holding it in place, reassemble the steering column by reconnecting the columns and screws. Make sure to check the connections again before moving the vehicle to ensure everything is properly connected.
(How To Get The Metal Plate Behind The Steering Wheel Off 01 Silverado)
By following these steps, you should be able to get the metal plate behind the steering wheel off your 2021 Silverado without damaging the console or any other components. If you encounter any difficulty or damage during the process, don’t hesitate to seek assistance from a professional mechanic.