Blog

how to remove metal plate from rear view mirror

Title: How to Remove a Metal Plate From a Rear View Mirror Without Tools


how to remove metal plate from rear view mirror

(how to remove metal plate from rear view mirror)

Introduction:

Rearview mirrors are an essential part of modern driving, allowing drivers to see behind them while they’re reversing or changing lanes. However, sometimes, metal plates may get stuck on the mirror and prevent it from functioning properly. In this article, we’ll guide you through the process of removing a metal plate from a rear view mirror without using any tools.

Materials:

– Safety glasses or goggles
– Plastic
– Rubbers or toothpicks
– Microfiber cloth

Step 1: Find the Metal Plate

The first step is to locate the metal plate that’s causing the problem. Look for a small gap in the rubber band around the mirror. If you can’t find the gap, you might need to use a screwdriver to open the door slightly.

Step 2: Use a Plastic Brush or Knife

Once you’ve located the metal plate, use a plastic brush or knife to gently pry off the backing. Be careful not to damage the glass of the rearview mirror while doing so.

Step 3: Apply Rubbers or Toothpicks

Using the microfiber cloth, apply some rubber or toothpicks to the area where the metal plate is stuck. Gently press down on the rubber or toothpicks until it starts to move away from the mirror. This will help to loosen the metal plate and make it easier to remove.

Step 4: Scrape Away the Metal Plate

Using the plastic brush or knife again, carefully scrape away the metal plate from the back of the mirror. Be sure to handle the metal plate with care, as it could be sharp.

Step 5: Reinstall the Mirror

Once you’ve removed the metal plate, reinstall the rearview mirror. Make sure to put all of the screws back into place securely, and that the rubber band around the mirror is still in place.

Conclusion:


how to remove metal plate from rear view mirror

(how to remove metal plate from rear view mirror)

In conclusion, removing a metal plate from a rear view mirror can be a simple process if you have the right materials and tools at hand. By following these steps, you should be able to remove the plate without damaging the mirror. Remember to take your time, be gentle when working with the metal plate, and always use caution when handling potentially sharp objects. With a little bit of effort and patience, you can restore your rearview mirror to its former glory!

Scroll to Top