If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
What is micro silica vapor?
Micro-silica Also known as silica or condensed fume, fume can be produced by ferroalloys. The mine thermoelectric oven produces many gases, including SiO2, when ferroalloys (ferrosilicon) and industrial silicon (metal silica) are melted. It is formed through rapid oxidation. It is produced by large-scale industrial melting. It is necessary to recycle this entire process with the help of dust removal equipment and environmental protection gear. Encryption equipment is needed because of the low density.
What are the main applications of microsilica?
It is used widely in the refractory industries because it has excellent properties like high refractoriness. It is mainly utilized to prepare high-temperature materials such as ceramics and ladles, wear-resistant high-temperature materials, breathable blocks, refractory castings, etc. Wang Tao et al. By using micro-silica and Al2O3 powder in a 3:2.5 ratio and a 1450degC sintering heat, they prepared high-purity mullite porous ceramics. Its compressive strength is 260.93MPa. The porosity of the material is 21%. The micro-silica can be used to improve the fluidity of refractory products, their bulk density, strength, cohesion at high temperatures, the durability of these materials and the internal digestion of dust produced by ferrosilicon or industrial silicon smelting companies.
Some North America firms also use silica and microsilica fume mixed granules as raw material for electric furnaces reduction and silicon melting. The unit energy consumption of the product is unchanged, but the silicon recovery rate appears to be normal. Elkem in Norway will agglomerate micro-silica with water into pellets about 4 cm long, which are then reduced and smelted directly in an electrical furnace without any roasting or drying. Sintered ore can also be produced at high temperatures without any problems such as bursting. In a Russian factory, micro-silica fumes and liquid waste from paper pulp are mixed into pellets. They then undergo reduction smelting using an electric furnace. This production shows that pellets can be transported without breaking because they’re stronger than normal materials. In Northern Europe, an enterprise that produces chromium used the microsilica powder slurry as a return silicon source. It was mixed with chromium ores to form pellets. The micro-cassia was found to improve the cohesiveness of chromium ore.
The majority of companies in the metalworking industry use microsilica fume to return materials. While this method can reduce environmental pollution due to micro-silica, it doesn’t fully exploit the magical properties of micro-silica. This is a very extensive application.
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has over 12 years experience in providing high-quality nanomaterials and chemicals. The SiO2 powder The products produced by our company are of high purity and have a low impurity level. Lower please Contact us if necessary.
Micro-silica Also known as silica or condensed fume, fume can be produced by ferroalloys. The mine thermoelectric oven produces many gases, including SiO2, when ferroalloys (ferrosilicon) and industrial silicon (metal silica) are melted. It is formed through rapid oxidation. It is produced by large-scale industrial melting. It is necessary to recycle this entire process with the help of dust removal equipment and environmental protection gear. Encryption equipment is needed because of the low density.
What are the main applications of microsilica?
It is used widely in the refractory industries because it has excellent properties like high refractoriness. It is mainly utilized to prepare high-temperature materials such as ceramics and ladles, wear-resistant high-temperature materials, breathable blocks, refractory castings, etc. Wang Tao et al. By using micro-silica and Al2O3 powder in a 3:2.5 ratio and a 1450degC sintering heat, they prepared high-purity mullite porous ceramics. Its compressive strength is 260.93MPa. The porosity of the material is 21%. The micro-silica can be used to improve the fluidity of refractory products, their bulk density, strength, cohesion at high temperatures, the durability of these materials and the internal digestion of dust produced by ferrosilicon or industrial silicon smelting companies.
The majority of companies in the metalworking industry use microsilica fume to return materials. While this method can reduce environmental pollution due to micro-silica, it doesn’t fully exploit the magical properties of micro-silica. This is a very extensive application.
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has over 12 years experience in providing high-quality nanomaterials and chemicals. The SiO2 powder The products produced by our company are of high purity and have a low impurity level. Lower please Contact us if necessary.