Titanium nitride is a refractory compound with high microhardness and chemical and thermal stability

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



What is titanium Nitride? Titanium Nitride is a refractory with high chemical and heat stability. TiN can be used for many purposes: as part of refractory material and cermets. It is also a good crucible in metal anoxic casts. In a study of the combustion of compacted samples of titanium powder in nitrogen, it was found that the nitrogen content in the titanium powder is the most important factor in the combustion. Titanium sponges are a cheaper, more convenient and purer source of titanium compared to titanium powder.
How can titanium nitride be used?
The PVD (physical vapor deposition) process produces a gold ceramic coating on the metal surface. The coating is hard and low friction, and it has a moderate resistance to oxidation. The coating is smooth and does require any post-painting.
TiN is commonly used on machine tools to improve their corrosion resistance and maintain the edges.

TiN, which is a golden metal, can be used for decorating costume jewelry or car accessories. It is also used widely as a top-coat on consumer sanitary items and door hardware. This is usually done using a nickel (Ni), or chromium, plated substrate. It can be used in aerospace and military applications, to protect the sliding surfaces found on front forks for bicycles and motorbikes, as well as the shock-absorbing shafts for radio-controlled vehicles. As TiN is extremely durable, it is also used on moving parts for many rifles and semiautomatic firearms. The coating is very smooth, which makes it easy to remove carbon deposits. TiN, which is FDA compliant and non-toxic has been used on medical equipment, such as orthopedic bone saw blades and scalpels where edge retention and sharpness were important. TiN coatings were also used to coat implanted medical implants, such as hip replacement implants.

TiN film, although not as visible, is also used for microelectronics as a conductive contact between active devices, such as circuits and metal contacts, as well as as a barrier to diffusion, to stop metal from diffusing to the metal. silicon. Although TiN is a ceramic material from a mechanical or chemical point of view in this case, it is classified a “barrier-metal” (resistivity less than 25 uO*cm). TiN can also be used in the latest chip designs (45 nm or higher) to improve transistor performances. When combined with a gate-dielectric that has a higher dielectric coefficient than standard SiO2 such as HfSiO, the gate length is reduced while maintaining low leakage. The TiN coating is also being considered for zirconium-alloys resistant to nuclear fuel.

TiN electrodes can be used for bioelectronic devices, including smart implants, in-vivo biosensors and other bioelectronic applications. They must withstand the corrosion that occurs in body fluids. TiN electrodes have been used in subretinal prosthesis projects and biomedical microelectromechanical systems (BioMEMS).

What’s better, titanium or Titanium Nitride?
Titan alloy drill bits can be a good choice for softer materials, such as wood and plastic. While the type of coating for titanium is different. As an example, titanium carbonitride coats are able to treat harder materials. Titanium, an element and metal, is composed of nitrogen and titanium.

Is titanium Nitride toxic?
Titanium Nitride, also called Tinite, is a very tough ceramic material that’s used to improve surface properties on titanium alloys and steel components.
TiN is used for a thin, protective coating on cutting and sliding surfaces. Due to its golden coloration, it can also be used for decorative purposes and to provide a nontoxic surface for medical implants. In many applications, the thickness of the coating is less that 5 microns. The study concluded the material tested was not toxic, nonirritating and nonhemolytic.

What is the strength level of titanium nitride?
feature. The Vickers hardness is 1800-2100. The elastic modulus of TiN, is 251 GPa. The tiN oxidizes at 800degC. Normal atmosphere.

Other advanced uses of titanium nitride

1. Photocatalysis of indium oxide CO2 by plasma titanium Nitride .
Photothermal titanium nitride (TiN) is a nano-scale metal material capable of capturing sunlight across a broad spectrum and generating a higher temperature locally through its photothermal effects. Indium oxide hydroxide (In2O3-x)(OH)y, a nanoscale semiconductor material, is capable of photocatalytic hydrogenation of gaseous CO2. The wide electron gap of In2O3-x(OH)y limits its ability to absorb photons in the ultraviolet range of the solar spectrum. In this article, two nanomaterials are combined in a ternary heterstructure: TiN at TiO2 and In2O3 -x(OH). This heterogeneous structural material synergistically combines metal TiN with semiconductor In2O3(OH)y via the interface semiconductor, TiO2. The conversion rate of photo-assisted reverse gas shift reaction will be much higher than the single component or binary combination.

2. Li-S battery polysulfide adjustments can be made by dissolving the vanadium within the titanium nitride framework.
The ability to adapt the host-guest chemistry in lithium-sulfur (LiS) batteries is a great advantage, but has yet to be applied effectively. Here, a unique titanium-vanadium-vanadium nitride (TVN) solid solution fabric was developed as an ideal platform for fine structure adjustment to achieve efficient and long-lasting sulfur electrochemistry. It is shown that by dissolving vanadium in the TiN structure, it can be used to adjust the electronic and coordination structure of Ti and Vanadium. This will change their chemical affinity toward sulfur species. This optimized TiV interaction provides the highest total polysulfide capacity and helps to fix sulfur and accelerate reaction kinetics. After 400 cycles of cycling, the Li-S battery has a capacity retention as high as 97%. The reversible surface capacity can also be maintained under high sulfur loads of 6.0 mcg cm-2, and an electrolyte with a concentration of only 6.5 mL/g-1. This study provides a novel perspective on future adjustments to high-quality lithium-lithium cells and their fine structure.
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has been providing high-quality Nanomaterials and chemicals for over 12 Years. Currently, we have developed a successful series of powdered materials. We offer OEM services. Our innovative high-performance materials can be found in all areas of life. This includes but is not limited to: automotive, electrical, electronic, information technology, petrochemicals and oil, ceramics, painting, metallurgy as well solar energy. To send us an inquiry, click on the desired products or send us an e-mail.